3 Bar Xenocron Now Doesent Run
07-17-2007 | 02:15 PM
#11
1.5 BAR
Joined: Apr 2006
Posts: 676
Re: 3 Bar Xenocron Now Doesent Run
Put a volt meter on the sensor. Make sure its outputting about 1.8V with the key on. This is obviously on the signal out pin/wire.
My honest guess is you didn't wire it correctly, the sensor itself is defective, your settings in Crome are wrong, or the mounting of the sensor resulted in breakage. The way that sensor is mounted really makes me cringe. I would never mount that sensor anywhere but in the cabin of my car with a very small diameter vacuum line ran to it.
My honest guess is you didn't wire it correctly, the sensor itself is defective, your settings in Crome are wrong, or the mounting of the sensor resulted in breakage. The way that sensor is mounted really makes me cringe. I would never mount that sensor anywhere but in the cabin of my car with a very small diameter vacuum line ran to it.
07-17-2007 | 09:18 PM
#16
Thread Starter
3.0 BAR
Joined: Jun 2006
Posts: 3,256
Re: 3 Bar Xenocron Now Doesent Run
Originally Posted by ososlohatch
g.m. 2.5 it looks like you can afford one
Anyone in the La, CA. area have a 2.5 or 3 bar f/s?
07-17-2007 | 09:51 PM
#18
Thread Starter
3.0 BAR
Joined: Jun 2006
Posts: 3,256
Re: 3 Bar Xenocron Now Doesent Run
Se said..
Trying to find a alternative right now.
Originally Posted by Xenocron
I will be on vacation from July 17th - July 31st, traveling all day on Tuesday July 17th I will not be able to check emails for a day or so until I get settled as I will be in a fairly remote location.
As soon and as often as I can, I will still be responding to emails throughout the 2 weeks and my employees will be in daily to handle the shipping and order processing operations.
Please call or email the shop if you have an immediate concern or need and speak with Ian or Jay.
973-846-7872 - Office Phone
customerservice@------------- - Office Email
As soon and as often as I can, I will still be responding to emails throughout the 2 weeks and my employees will be in daily to handle the shipping and order processing operations.
Please call or email the shop if you have an immediate concern or need and speak with Ian or Jay.
973-846-7872 - Office Phone
customerservice@------------- - Office Email
07-17-2007 | 10:16 PM
#19
1.5 BAR
Joined: Apr 2006
Posts: 676
Re: 3 Bar Xenocron Now Doesent Run
******, have you run a volt meter on the damn sensor? If not, ------- yourself isn't the solution. Instead you should drink battery acid. Seriously, if you don't know how to use a volt meter and can't figure it out, you should quit playing with cars ASAP.
