Distro for D16Z6 with obd0 electrics?
06-21-2004 | 07:16 PM
#3
Thread Starter
1.5 BAR
Joined: Feb 2004
Posts: 1,039
Re:Distro for D16Z6 with obd0 electrics?
i've been searching but all i get is
"yeah you need an obd0 distributor and mod it....."
they dont say how to mod it or anything useful :O
i need a clear cut idiot's guide to using a a6 distro in a z6 engine
"yeah you need an obd0 distributor and mod it....."
they dont say how to mod it or anything useful :O
i need a clear cut idiot's guide to using a a6 distro in a z6 engine
06-21-2004 | 07:27 PM
#4
3.0 BAR
Joined: Nov 2004
Posts: 5,101
Re:Distro for D16Z6 with obd0 electrics?
go to walmart (with some money) and get a dremmel(tools isle). buy the metal cutting bit(usually above the dremmel), looks like a drill bit but not. walk up to the front of the store with both in your hands, find an empty reg. put the items on the black magical moving belt. flirt with the 18 year old hot *** chick at the reg. pay for it, go to your car and drive home. when you get home open the packageing and READ the instructions. use the new metal cutting bit to round out the hole in the ear on the dizzy that is pointing up when the dizzy is aligned correctly, TAKE THE DIZZY AWAY FROM THE CAR lol take the bit and start to round out that hole. wipe off the metal shavings that it creates before testing it in the car again. after you get a good fit , move the dizzy where you need it and use another bolt to hold one of the other legs with a washer to help pin the bottom to keep from leaking oil. there your done.
06-21-2004 | 07:32 PM
#5
Thread Starter
1.5 BAR
Joined: Feb 2004
Posts: 1,039
Re:Distro for D16Z6 with obd0 electrics?
Originally Posted by onyx
go to walmart (with some money) and get a dremmel(tools isle). buy the metal cutting bit(usually above the dremmel), looks like a drill bit but not. walk up to the front of the store with both in your hands, find an empty reg. put the items on the black magical moving belt. flirt with the 18 year old hot *** chick at the reg. pay for it, go to your car and drive home. when you get home open the packageing and READ the instructions. use the new metal cutting bit to round out the hole in the ear on the dizzy that is pointing up when the dizzy is aligned correctly, TAKE THE DIZZY AWAY FROM THE CAR lol take the bit and start to round out that hole. wipe off the metal shavings that it creates before testing it in the car again. after you get a good fit , move the dizzy where you need it and use another bolt to hold one of the other legs with a washer to help pin the bottom to keep from leaking oil. there your done.
and my tard *** just figured out how to search the archived content on honda-tech :-p so much ---- there haha; oops; reading is overrated
06-23-2004 | 01:16 PM
#6
1.0 BAR
Joined: Nov 2003
Posts: 343
Re:Distro for D16Z6 with obd0 electrics?
Originally Posted by onyx
go to walmart (with some money) and get a dremmel(tools isle). buy the metal cutting bit(usually above the dremmel), looks like a drill bit but not. walk up to the front of the store with both in your hands, find an empty reg. put the items on the black magical moving belt. flirt with the 18 year old hot *** chick at the reg. pay for it, go to your car and drive home. when you get home open the packageing and READ the instructions. use the new metal cutting bit to round out the hole in the ear on the dizzy that is pointing up when the dizzy is aligned correctly, TAKE THE DIZZY AWAY FROM THE CAR lol take the bit and start to round out that hole. wipe off the metal shavings that it creates before testing it in the car again. after you get a good fit , move the dizzy where you need it and use another bolt to hold one of the other legs with a washer to help pin the bottom to keep from leaking oil. there your done.
Who else is running this setup and his timing is fine?
06-23-2004 | 09:39 PM
#7
Thread Starter
1.5 BAR
Joined: Feb 2004
Posts: 1,039
Re:Distro for D16Z6 with obd0 electrics?
Originally Posted by iNetForce
Originally Posted by onyx
go to walmart (with some money) and get a dremmel(tools isle). buy the metal cutting bit(usually above the dremmel), looks like a drill bit but not. walk up to the front of the store with both in your hands, find an empty reg. put the items on the black magical moving belt. flirt with the 18 year old hot *** chick at the reg. pay for it, go to your car and drive home. when you get home open the packageing and READ the instructions. use the new metal cutting bit to round out the hole in the ear on the dizzy that is pointing up when the dizzy is aligned correctly, TAKE THE DIZZY AWAY FROM THE CAR lol take the bit and start to round out that hole. wipe off the metal shavings that it creates before testing it in the car again. after you get a good fit , move the dizzy where you need it and use another bolt to hold one of the other legs with a washer to help pin the bottom to keep from leaking oil. there your done.
Who else is running this setup and his timing is fine?
06-25-2004 | 09:46 AM
#8
3.0 BAR
Joined: Nov 2004
Posts: 5,101
Re:Distro for D16Z6 with obd0 electrics?
im running a dizzy modified that way now and it is just fine. you need to make sure and bore that slot out till there is barely any metal on the outside of it so the bolt will have lots of play
