Garrett turbo on 1400
06-16-2006 | 03:31 PM
#1
Thread Starter
0.0 BAR
Joined: May 2006
Posts: 16
Garrett turbo on 1400
i got a garret turbo vnt15
http://www.technologie-entwicklung.d...t15-turbo.html
i want to install it on my 1.4 motor
it will give power to my motor
sorry about my bad english
http://www.technologie-entwicklung.d...t15-turbo.html
i want to install it on my 1.4 motor
it will give power to my motor
sorry about my bad english
06-17-2006 | 12:54 PM
#7
Guest
Posts: n/a
Re: Garrett turbo on 1400
Well the deisel motor doesn't rev as high of flow as much air as a your 1.4 so that little garret turbo will work fine for the deisel engine. But it will not flow enough air cfm for your d14. these guy are right a t25 would be perfect for your engine.
06-17-2006 | 01:57 PM
#9
Guest
Posts: n/a
Re: Garrett turbo on 1400
Well it would probably give power up to about 3500-4000 rpm then oyu would loose power because the exhuast would be restricted that turbo will basicaly choke your engine. like putting 1inch exhaust on a corvette
A t25 will suit you very well. and 25 turbo's are very common and are really cheap. you can get one at a junkyard in the usa for $50
if you already have the small turbo you can just sell it and use the money to buy a t25.
A t25 will suit you very well. and 25 turbo's are very common and are really cheap. you can get one at a junkyard in the usa for $50
if you already have the small turbo you can just sell it and use the money to buy a t25.
06-17-2006 | 02:17 PM
#10
Thread Starter
0.0 BAR
Joined: May 2006
Posts: 16
Re: Garrett turbo on 1400
ohh ok now i understand !
and if i install freeflow exhaust system? less chokeing ?
and other thing -- ! my motor 1.4 working on carb ... maybe it changes that the tubo will work in other way?
and if i install freeflow exhaust system? less chokeing ?
and other thing -- ! my motor 1.4 working on carb ... maybe it changes that the tubo will work in other way
?
