Forced Induction Custom FI Setup Questions

S-10 Turbo Kit

Thread Tools
 
Search this Thread
 
Old 03-01-2003 | 10:00 PM
  #11  
HMT-Admin's Avatar
Administrator
 
Joined: Dec 2002
Posts: 13,991
Default Re:S-10 Turbo Kit

700 bucks? I thought they were like 500 bucks for the duel injector setup.. thats more than enough for your setup

If you dont want to buy "their" expensive injectors just get some out of a DSM, they should do the trick.

Is your fuel system returnless?

Jeff

Old 03-02-2003 | 05:14 PM
  #12  
Smash's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2003
Posts: 69
Default Re:S-10 Turbo Kit

I dont know if it is returnless, I would go out and check but we just got like 2 feet of snow so i'll put it on the hoist tomorrow. What all would I need if I put those DSM injectors? like would I have to put a new fuel pump on or somthing, or put on one of those electronic dials? I would realy like a quick fix for this fuel problem.
Thanks

Old 03-02-2003 | 05:16 PM
  #13  
HMT-Admin's Avatar
Administrator
 
Joined: Dec 2002
Posts: 13,991
Default Re:S-10 Turbo Kit

Not sure if the DSM injectors will work with your setup, you will have to get something to pulse them slower, otherwise it would run to rich. Why not get the controller and use DSM injectors with that?
Old 03-02-2003 | 07:47 PM
  #14  
Smash's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2003
Posts: 69
Default Re:S-10 Turbo Kit

What is this controller for the DSM injectors? Sorry if I sound stupid but I have never done this before and it all sounds foreien to me. What I need is the easiest and cheapest way to control my fuel. were could I take a look at this conroller/dsm injector thing, and get some prices on it? I think this is asking for alot but could you give me a rough estimate of what it is going to cost me to do this fuel setup, mabie like a high and a low?
Thanks
Old 03-02-2003 | 08:06 PM
  #15  
HMT-Admin's Avatar
Administrator
 
Joined: Dec 2002
Posts: 13,991
Default Re:S-10 Turbo Kit

low, depending on fuel setup.. 100 bucks (basic FMU)

high, standalone setup 1500+

What people are using on honda/acuras are vtec/fuel controllers. (designed mainly for imports) I really dont think it would work on your S10.

So, that is why I recommended a Injector controller, so you could just simply add a few injectors (DSM or whatever) on your upper IC pipe, and have a controller to adjust them. This way you would have no problems with emissions, and enough fuel for boosting.

Jeff
Old 03-02-2003 | 09:08 PM
  #16  
Smash's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2003
Posts: 69
Default Re:S-10 Turbo Kit

Ok so your saying all I have to do is replace my injectors with ones that allow more flow. and a controller, what does this controller do and were does it hook up. Would you recomened a certain model or brand?
Thanks
Old 03-03-2003 | 03:33 PM
  #17  
Smash's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2003
Posts: 69
Default Re:S-10 Turbo Kit

Jeff-

If I got a two new injectors and an injector controler my problem would be solved?
Old 03-03-2003 | 04:39 PM
  #18  
HMT-Admin's Avatar
Administrator
 
Joined: Dec 2002
Posts: 13,991
Default Re:S-10 Turbo Kit

yup..
Old 03-06-2003 | 08:16 PM
  #19  
Smash's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2003
Posts: 69
Default Re:S-10 Turbo Kit

Jeff -

I was talking to dave at www.coximport.com about some injectors, he has some that flow 10% more fuel then the stock ones, and he says there a direct fit so I dont need a contoller is this true? The injectors are $55.00 each is that ok?
Thanks
Larry
Old 03-06-2003 | 11:26 PM
  #20  
HMT-Admin's Avatar
Administrator
 
Joined: Dec 2002
Posts: 13,991
Default Re:S-10 Turbo Kit

hmm, well think about it... 10% more flow, ya you will be able to boost a little bit more, but not much. Yes they probably will run ok with the stock computer. 50 bucks is a bit pricy.





Quick Reply: S-10 Turbo Kit



All times are GMT -5. The time now is 10:45 PM.