Well new stuff is on need to have it tuned still. Thanks to the guys at intec for fixing my mistakes





now my downpipe hangs really freaking low. little bit of a bounce and i scrape going down the freeway. i will have to fix that somehow. I am also still waiting on my powerplate for my cutout so right now it is just blocked off.



So a log mani
tail 38mm wastegate and a 1.0 bar and .4 bar springs (14.5psi and 5.8 psi) small red spring on now.
t3/t4 60/63A.R.
3inch downpipe with E cutout.

I think i am done now i just need to setup with Dave to see what we can break!

 

Nice setup !! Go the zc motors

 

ls/vtec?

 

Get the E-cutout and Im ready when you are. Just give me a call.

 

never seen a zc in an em1 with an s4 tranny and a vtec solenoid :P

how much boost are you running

 

woops :P
Looked like a black top zc there for a minute haha

 

Idealy, shouldn't the flex pipe section be after the dumptube and DP meet?

 

v-band from the down pipe to exhaust.. i like that

 

actually that vband is for my ecutout. there is another pipe off to the right that bends back over for my b pipe.

As of now it is pushing more then 16psi which i would like to lower untill dave tunes it. but it is a b16 with CP 9:1