GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
03-05-2007 | 05:53 PM
#1
Thread Starter
1.0 BAR
Joined: Nov 2005
Posts: 483
GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
This is a 1991 Honda Civic Hatch DX body with a 1990 d16a6 si engine and transmission w/ LSD clutch (Heavy Duty Plate with 6-puck sprung disk). I tried doing the MPFI conversion, but it didn't work out, I think it was the ecu which is now gone, you will have to get a new ecu. The engine was "devconned" when rebuilt, which included bore and hone, new pistons and rings, new main and rod bearings, all new gaskets including head gasket, new valve seals, and valves seated, head and block surfaced and thoroughly cleaned by machine shop, toga high volume oil pump. Compression checked at 180 on all 4 when I checked it about a month ago, which was after I stopped driving it. Also includes a second set of steelies with tires at about 80% tread left, SI seats and SI dash (both black), also SI gauge cluster with tachometer. 2.25" exhaust with magnaflow resonator, hi-flow cat, and muffler(muffler will need replacing, the rear fell off while driving and is scraped through the metal. Any other questions, just PM me.
I will also throw in an HF manifold, greddy turbo timer, autometer oil psi gauge, and 1G dsm bov all in working conditon.
got backed into in a parking lot at 7 mph, the fender and door are bent in and rub together when the door is opened, no frame damage, and the door still opens very easily
ONLY asking $300, pickup only, no delivery
Thanks,
Keenan
I will also throw in an HF manifold, greddy turbo timer, autometer oil psi gauge, and 1G dsm bov all in working conditon.
got backed into in a parking lot at 7 mph, the fender and door are bent in and rub together when the door is opened, no frame damage, and the door still opens very easily
ONLY asking $300, pickup only, no delivery
Thanks,
Keenan
03-05-2007 | 08:57 PM
#8
0.0 BAR
Joined: Dec 2002
Posts: 0
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Originally Posted by Joseph Davis
It needs MPFI conversion finished - beyond you, Danno.
Consider it sold, Holmes. Check your PMs so I can arrainge pickup.
Consider it sold, Holmes. Check your PMs so I can arrainge pickup.
03-05-2007 | 09:02 PM
#9
0.0 BAR
Joined: Feb 2003
Posts: 0
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Start Asheville, NC 28801, US Revise | New Directions
End Fayetteville, GA 30214, US Revise | New Directions
Total Est. Time: 3 hours, 59 minutes
Total Est. Distance: 230.51 miles
Sweet, easy two hour forty five minute drive each way.
End Fayetteville, GA 30214, US Revise | New Directions
Total Est. Time: 3 hours, 59 minutes
Total Est. Distance: 230.51 miles
Sweet, easy two hour forty five minute drive each way.
03-05-2007 | 09:05 PM
#10
0.0 BAR
Joined: Feb 2003
Posts: 0
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Originally Posted by chris
Hell Ya. pinks 2009 Ill be there
PS - I'll be at Pinks All Out in Rockingham a month from tomorrow. We'll do like Jeffs Gilbert + Creech did, and bring a nine second car claiming it's a ten second car. :P
